LEAF 2021

Prices and Supplies are subject to change without notice CUSTOMER SERVICE 1-262-763-4087 FAX 1-262-763-1920 ThrottlES / AIRFRAME PARTS / TUBING Throttle Knob Throttle Lever Choke Knob Choke Lever ALUMINUM TUBING 6061-T6 Aluminum Tubing This seamless drawn aluminum tubing available in unanodized mill finish and sold in 6’ or 12’ lengths. SALE! While Supply Lasts! O.D. I.D. Wall Thickness Finish Lbs./Ft. Part No. Price .5” .430 .035 Unanodized .060 A1142 ft. $1.50 ENGINE BAFFLE GASKET MATERIAL Description Part No. Price Non-Reinforced Engine Baffle Material 3/32” Material is silicone rubber. Excellent for replacement of baffle seals as it exceeds asbestos type seals in durability and flexibility over its entire operating heat range of –80 degrees F to +425 degrees F. 3” x 9 ft. rolls that can be cut and trimmed for multiple uses. Meets the AMS 3320 specification. Black H9189 $23.45 Orange H9190 $23.45 Lycoming Blue H9191 $28.95 Reinforced Engine Baffle Material 3/32” Reinforced Engine Baffle Material improves engine cooling; prevents deterioration from fuel and oil by replacing the engine baffle gasket material on your aircraft. 3” x 9 ft. roll can be cut and trimmed for multiple uses. Handles temperatures from -65° F up to 550° F. Meets the AMS 3320 specification. Material has fiberglass mesh for reinforced strength and is better suited for wider openings. Black H9185 $41.30 Orange H9186 $38.50 Lycoming Blue H9187 $41.30 Champion Red H9188 $48.95 THROTTLE QUADRANTS Description Part No. Price One-arm and two-arm throttle quadrants work with Rotax ® engines but require an adapter kit for installation of both throttle and choke to the quadrant. Installs on most ultralights. Includes friction control knob. The one-arm quadrant weighs 1/2 lb. and is 4” wide and 7-1/2’ tall. The two-arm quadrant weighs 1 lb. and is 4” wide and 7-1/2” tall. Throttle Quadrants with friction control for 2-Stroke Rotax ® Engines 1-Arm Pusher Hook-Up H7101 $72.30 1-Arm Tractor Hook-Up H7102 $72.30 2-Arm Pusher Hook-Up H7105 $74.60 2-Arm Tractor Hook-Up H7125 $74.60 1-Arm Adapter Kit Pusher or Tractor Includes bracket, adjuster, wire swivel, brass sleeve and all necessary hardware. H7140 $7.65 2-Arm Adapter Kit Pusher or Tractor Includes brackets, adjusters, wire swivels, brass sleeve, all necessary hardware H7150 $19.95 Replacement Throttle Knob , red H7103 $7.50 H7102 H7125 H7105 29 SNAP VENTS Use in metal cowling or plastic windshields. Description Part No. Price 2” Vent Mounts in 2” dia. opening. Can be turned to provide any degree of ventilation with off position by turning downward. L6000 pr. $19.25 3-1/4” Vent Mounts in 3-1/4” dia. opening. Rotates to provide any degree of ventilation. Retracts to closed position nearly flush with mounting surface. L6005 pr. $22.35 1” FOAM CONTROL STICK GRIP 2-Year UV guarantee on material. M2570 $3.50 COWL CHAFE Description Part No. Price Cowl Chafe Seal, 1” Used where cowl sections overlap. Can also be used around inspection doors. Phenolic cure Nigen cord is not affected by heat, cold or chemicals. Manufactured to MIL-C-5649. 1” wide x 15’ roll H9183 $17.80 Black Silicone Cowl Chafe Seal, 1/16” Includes a two part silicone cement and catalyst which is mixed and then applied to the surfaces. Non-hazardous. 1/16” thick x 1” wide x 15’ roll H9184 $53.50 L6005 L6000 L5100 L5101 H9183 H9184 H7101 H7140 H7150 H7103 Elevator Trim Tab Assembly Description Part No. Price This cockpit adjustable trim tab assembly can be easily installed on any ultralight and enables the pilot to trim the elevator. All parts are included. L5100 $135.00 Hall Brothers Vortex Generator This generator has a lower stall speed, better rate of climb, reduced takeoff and landing distances. Also provides improved handling of the airplane in normal speed ranges. Includes enough Vortex Generators for a typical homebuilt wing and stabilizer (46 pairs curved and 16 pairs flat), tape for temporary attachment, adhesive for permanent attachment and instructions. Made from .025” 6061-T6 aluminum. L5101 $186.25